Stihl MS 240

30 MS 240, MS 260, MS 260 C
7.7 Bar Mounting Studs
– Remove the sprocket cover and
cutting attachment, b 5
– Remove the side plate, b 7.6
: Push stud puller 5910 893 0501
(1) over the collar studs (arrows)
as far as it will go and unscrew
the studs counterclockwise.
: Before installing, coat threads
(arrow) of collar studs with
Loctite, b 17
– Fit collar studs and tighten them
down firmly.
– Tightening torques, b 3.5
– Reassemble all other parts in the
reverse sequence.
165RA081 TG
1
165RA082 TG
Versions with Quick Chain
Tensioner
– Remove the sprocket cover and
cutting attachment, b 5
– Remove the side plate, b 7.6
: Push stud puller 5910 893 0501
(1) over the collar stud (arrow) as
far as it will go and unscrew the
stud counterclockwise.
: Before installing, coat thread
(arrow) of collar stud with Loctite,
b 17
– Fit collar stud and tighten it down
firmly.
– Tightening torques, b 3.5
Reassemble all other parts in the
reverse sequence.
165RA083 TG
1
165RA087 TG