Stihl MS 240 User Manual

118 MS 240, MS 260, MS 260 C
17. Servicing Aids
No. Description Part No. Application
1 Lubricating grease (225 g tube) 0781 120 1111 Oil seals, sliding and bearing points
2 STIHL special lubricant 0781 417 1315 Bearing bore in rope rotor, rewind spring in fan
housing
3 STIHL press fluid OH 723 0781 957 9000 Rubber components, AV buffers
4 STIHL multipurpose grease 0781 120 1109 High voltage output on ignition module
5 Dirko HT red sealant 0783 830 2000 Crankcase, oil seals (outside)
5 Medium-strength threadlocking
adhesive (Loctite 242)
0786 111 2101
6 High-strength threadlocking
adhesive (Loctite 270)
0786 111 2109
7 High-strength threadlocking
adhesive (Loctite 648)
0786 111 2117
8 Standard commercial solvent-
based degreasant containing no
chlorinated or halogenated
hydrocarbons
Cleaning sealing faces and carburetor,
crankshaft stubs and flywheel taper

Stihl MS 240 Specifications

General

Chain pitch	3/8"
Oil Capacity	0.2 L
Guide bar length (recommended)	40 cm
Engine Power	2.0 kW (2.7 bhp)
Displacement	41.6 cm³