EasyManuals Logo

Still EK-X10 User Manual

Still EK-X10
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #108 background imageLoading...
Page #108 background image
7 Special equipment
Electronic access control
Function
When the operator intends to take a passen-
ger, the relevant operating mode must be set
by turning the key switch to the correct symbol.
The passenger enters the cab and closes the
barrier. One or, if available, both foot switches
must be actuated. The passenger is required
to hold both handles and at the same time
press the coordination switch. The passenger
must adopt a position which does not impede
the operator.
Check
Before setting off, the eq
uipment features
must be checked. In the pas
senger mode,
the truck must not permit a
ny function unless
the coordination switch i
s actuated. If one of
the coordination switche
s is released during
a function, all functions
must come to an
immediate stop.
Electronic access con
trol
The operating panel co
ntroller is switched on
by pressing the button
(1). The symbol (2)
appears in the displa
y and asks for the 5-digit
PIN code programmed in t
he controller to be
entered using the keypa
d. If the PIN code
is entered correctly
, the truck control unit is
switched on and the indu
strial truck is ready
for operation. If the PI
N code is not entered
correctly, it must be en
tered again.
Defining the PIN code, c
hanging the PIN
code
The PIN code can be changed so that each
industrial truck has an individual access code.
To do this, an authorised person can select the
required PIN code from a code list stored in the
controller. This coding process is covered in a
separate description.
Incorrect PIN code entry
If an incorrect PIN code is entered, the buzzer
will sound on the operating panel. If an
102
5212 804 3001 EN - 02/2017

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Still EK-X10 and is the answer not in the manual?

Still EK-X10 Specifications

General IconGeneral
ModelEK-X10
CategoryOrder Picker
DriveElectric
Load Capacity1000 kg
Power SourceBattery
Battery Voltage24 V
Turning Radius1500 mm

Related product manuals