Operation 4
Daily commissioning
Battery compartment door
The side openings of the battery compartment
can be closed with battery compartment doors
if required. Two swing bolts hold the doors in
their positions.
To remove the battery compart
ment doors,
move the two rotary handles
into the open
position by rotating them 9
0°. The battery
compartment doors can then
be lifted from
their bottom fixing points.
CAUTION
The battery compartment doors may fall out after
the swing bolts have been opened.
When opening the swing bolts, hold the door with
the other hand.
CAUTION
Damaged swing bolts can no longer hold the battery
compartment doors securely.
If one of the swing bolts is damaged, the industrial
truck must not be used. Repair the swing bolt or
remove the battery compartment doors.
Daily commissioning
Checklist before starting work
WARNING
If, after havi
ng done the checks before starting
work any def
ects, regarding operating or traffic
safety are
discovered, then steps have to be taken
immediat
ely to properly and professionally repair
theses
defects.
It is pro
hibited to continue operating the industrial
truck
until the repairs have been completed.
Bef
orestartingwork,thedrivermustmake
sur
e that the industrial truck is in a safe
op
erating condition. General checks:
• Clarify whether a driver’s permit is manda-
tory in the country of application.
• The industrial truck may be operated only
when the covers and flaps are closed and
the covers are in place
Function check of the braking systems
• Check the funct
ion of th foot switch braking
function.
• Check the area around the foot switch brake
for foreign bodies.
• Check the reversing brake. The braking and
subsequent acceleration must be smooth
and without jerking.
• Check the
brake function after actuating the
emergenc
y off switch
• Check system function on End of aisle
braking*: Automatic braking with release,
creep speed switchover and complete stop.
521
2 804 3001 EN - 02/2017 49
To Next Page
Loading...
Need help?
General
