2 Safety
Risk assessment
Risk assessment
Within the scope of validity of the CE guide-
lines, the operating company must create
operating instructions on the basis of a risk
assessment. The purpose of the risk assess-
ment is to identify dangers and the associated
risks that could occur due to the product or
the application of the product in the specific
place of use and under the application condi-
tions at this place of use. We can help you to
complete the risk assessment. The operating
instructions are intended to warn against the
identified dangers and provide information on
possible remedial actions.
We recommend integrating these operating
instructions into the operating procedures for
the specific place of use.
Regular testing
This industrial truck must be checked at least
once a year by a specialist (expert) according
to our specifications.
Our test instructions
summarise all activities
that must be performed
for the purposes of
detecting damage or de
fects that have an
effect on safety. The r
equirements pursuant
to FEM 4.004 are includ
ed in these test
instructions.
A written report about the inspection has to be
created.
Please check whether regular safety inspec-
tions of the truck by an authorized expert are a
legal requirement in the country this truck will
be used. You are responsible for doing so as
operating company of the truck.
Residual risks
Despite observation of all pertinent safety
regulations for the design and construction
of our trucks and despite proper use by the
operating company, residual risks can occur
during operation. We refer to this specifically
in the individual chapters.
16 5
212 804 3001 EN - 02/2017
To Next Page
Loading...
Need help?
General
