Operation 4
General commissioning
Drive battery
WARNING
Danger of injuring
The electrolyte (battery acid) is toxic and corrosive
on contact. Observe with the prescribed safety
measures when handling battery acid. For newly
charged batteries in particular, be aware of the risk
of explosion in the gassing area.
Battery dimensions
NOTE
The battery must comply with the specifica-
tions on the nameplate of the industrial truck
regarding voltage and weight. Compare the
nameplates on the industrial truck and battery.
The battery must fill the installation space
with just a few millimetres of play. This makes
it impossible for the battery to slip or tip over
while the truck is in motion. The corresponding
battery data (tray number, voltage, capacity)
can be found on the order documentation.
Battery weight
If a lighter battery is used temporarily, the
weight difference must be compensated for
with a fixed ballast. Size differences must be
compensated for with shims. The information
on the nameplate of the industrial truck must
be either adjusted or extended.
Battery type
CAUTION
Danger of material damage
Using the wrong charger can result in complete
failure of the battery.
Lead, gel or dry batteries can be used as
traction batteries. Because the various types
have different structures, matching battery
chargers must be used.
NOTE
521
2 804 3001 EN - 02/2017 45
To Next Page
Loading...
Need help?
General
