3 Overview
Displays, information
Response:
-
Lift/lowering stop.
Cause:
-
Operating error.
-
Left hand operation does not come before selecting lifting or lowering.
-
Wiring defective.
Remedy:
-
Reset by switching the truck off then on again.
-
Release the operating d
evices and select in correct sequence.
.
Info 15
Description:
-
Operation error for driving.
Response:
-
No driving function available. Symbol in the display lights up.
Cause:
-
Incorrect sequence.
-
Foot switch signal missing.
-
2-hand operation signal is missing.
Remedy:
-
Carry out the correct sequence.
In the event of all other errors, contact the
responsible service centre.
38 5
212 804 3001 EN - 02/2017
To Next Page
Loading...
Need help?
General
