Still RX70-35 - STILL Classic and Sprint Mode

STILLClassic and sprint mode
Drive modes influence the driving perform-
ance and the lifting performance of the electric
drive.
Two different drive modes are available:
1
STILLClassic
This mode is active after the truck
has been switched on. This mode is
the default setting and provides a bal-
ance between hydraulic functions and
driving functions. The maximum speed
is 18km/h. No symbol is shown on the
display.
2
Sprint mode
In sprint mode, the truck accelerates
more quickly to a maximum speed of
21km/h. Sprint mode is for driving on
clear and spacious terrain.
NOTE
If sprint mode is used, the drive units heat up
more quickly.
Switching sprint mode on and off
– To switch on sprint mode, push the associ-
ated Softkey.
The "sprint mode"symbol
(2) appears on
the display of the display-operating unit. Sprint
mode is switched on.
– To switch off the mode, push the Softkey
again.
The symbol disappears and the mode is
switched off. The truck is then back in
STILLClassic mode.
Automatic switch off for sprint mode
If the truck is operated in sprint mode at the
maximum performance level, the truck will
consume more energy. This means that both
the drive units and the energy supply may get
too hot.
The temperatures of the drive units and the
energy supply are monitored continuously. If
an excessively high temperature occurs, sprint
mode is automatically deactivated.

Operation
4
Blue-Q efficiency mode
 14757378011527EN-12/2023 - 07