Still RX70-35 - Providing Access to Maintenance Points; Opening the Bonnet

Providing access to maintenance points
Opening the bonnet
WARNING
Risk of injury!
– Switch off the engine before opening the bonnet!
CAUTION
When opening the bonnet, the driver's seat may be
damaged if it is not in its forwardmost position.
– Slide the driver's seat all the way forwards.
CAUTION
If the right-hand door of the cab (variant) is closed,
door fittings can be damaged when the bonnet is
opened.
– Make sure that the right-hand cab door is open.
– On forklift trucks equipped with a cab (var-
iant), open the right-hand cab door.
– Remove all loose objects from the right-
hand shelf.
– Move the steering column (1) as far for-
wards as possible and secure; see section
entitled "Adjusting the steering column".
– Slide the driver's seat (2) all the way for-
ward; see section entitled "Adjusting the
MSG65/MSG75 driver's seat".
– On trucks equipped with a rear window
(variant), push the seat backrest forwards;
see section entitled "Adjusting the MSG65/
MSG75 driver's seat".
7311_120-001
1
2

Maintenance
5
Providing access to maintenance points
 41957378011527EN-12/2023 - 07