Still RX70-35 - Closing the Cab Door

Closing the cab door
DANGER
There is a risk of damage caused by collision if the
cab door opens while driving.
– The cab door must be latched securely in the en-
gaged position.
Closing the cab door from the outside:
– Push the cab door(3) inwards until the door
lock engages.
– Make sure that the cab door is fully closed.
– Insert the key in the door lock(1), lock the
door and remove the key.
NOTE
Do not close the cab door while pulling the
door handle(2), otherwise the locking mecha-
nism in the lock will not function. Use the door
handle only to open the cab door.
Closing the cab door from the inside:
– Take hold of the handle(5).
– Pull the cab door inwards until the door lock
engages.
– Make sure that the cab door is fully closed.
NOTE
Do not turn the rotary handle(4) when closing
the door or when the cab door is closed. Do-
ing so will cause the lock to unlock, meaning
that the door will not be securely closed. Use
the rotary handle only to open the cab door.
7300_003-003
5
2
1
3
4

Operation
4
Cab
 338 57378011527EN-12/2023 - 07