Still RX70-35 - Schematic Views; List of Abbreviations

Schematic views
View of functions and operating proce-
dures
At many points in this documentation, the
(mostly sequential) operation of certain func-
tions or operating procedures is explained.
Schematic diagrams of a counterbalance truck
are used to illustrate these procedures.
NOTE
These schematic views are not representative
of the construction of the documented truck.
The views are used solely for the purpose of
clarifying procedures.
View of the display-operating unit
NOTE
Views of operating statuses and values in the
display of the display and operating unit are
examples and partly dependent on the truck
equipment. As a result, the displays shown of
the actual operating statuses and values may
vary.
List of abbreviations
This list of abbreviations applies to all types
of operating instructions. Not all of the abbre-
viations that are listed here will necessarily
appear in these operating instructions.
Abbrevi-
ation
Meaning Explanation
ArbSchG Arbeitsschutzgesetz
German implementation of EU occupation-
al health and safety directives
Betr-
SichV
Betriebssicherheitsverordnung
German implementation of the EU working
equipment directive
6210_003-062

12,6 h
10:35
6219_003-021_V3

Foreword
1
Information about the documentation
 22 57378011527EN-12/2023 - 07