Still RX70-35 - Page 261

Option: Lifting beyond the intermediate
lift cut-out using the "F button"
Optionally, the authorised service centre can
configure the function so that the intermedi-
ate lift cut-out is suspended by pressing the
"F" button on the operating devices for the
hydraulic functions.
– Lift the fork carriage until it stops at the con-
figured lift height.
– Release the "lifting"operating device and
push the "F" button.
The black symbol disappears. The function is
suspended for a short period.
– Continue lifting within one second, as other-
wise the function will intervene again. If the
function intervenes again, the black symbol
will reappear.
Switching off the intermediate lift cut-out
– Press the button.
The first menu level appears.
– Press the
softkey.
– Press the
softkey.
The orange-coloured activation bar next to the
softkey goes out.
The
symbol disappears from the main dis-
play.
The function is switched off until the next time
the truck is restarted.
Configuration by the fleet manager
– Activate the "Access authorisation for the
fleet manager".
– Press the
button.
– Press the
softkey.
Operation
4
Lift height-dependent assistance systems
 24757378011527EN-12/2023 - 07