STM SatLink VSAT - Page 153

SatLink VSAT User Guide
Publication no. 101557
Rev 14.1.1-2
Copyright 2006-2012 – STM Group, Inc.
Page 152 (182)
Finally, the F-connectors must be protected against rain and humidity. Use a self-vulcanizing tape suitable
for outdoor use. The cables must also be properly marked and should be strapped to the antenna feed
mount.
Figure 58: Complete Assembled ODU with Cables Strapped to Antenna Feed Mount
Important: Do not use amplifiers or attenuators on the TX-cable.
Use type “F” connectors for the cables.