Appendix L. Compliance
L.1 Article 3 of the R&TTE 1999/5/EC Directive
The SatLink 1000, 1910, 2000, and 2900 comply with the essential requirements of Article 3 of the
R&TTE 1999/5/EC Directive, if used for its intended use.
L.1.1 Safety (Article 3.1.a of the R&TTE Directive)
This equipment has been designed and tested to meet the requirements of the following standards:
EN 60950-1:2006
L.1.2 Electromagnetic Compatibility (Article 3.1.b of the R&TTE Directive)
This equipment has been designed and tested to meet the requirements of the following standards:
EN 301 489-1:V1.8.1
EN 301 489-12:V2.2.2
L.1.3 Efficient use of the Radio Frequency Spectrum (Article 3.2 of the R&TTE
Directive)
This equipment has been designed and tested to meet the requirements of the following standard:
EN 301 428:V1.3.1
L.2 SatLabs Qualification
The SatLink 1000, 1910 and 2000 have successfully passed the SatLabs Qualification program
(www.satlabs.org). The SatLink 1000 and 1910 have been tested compliant for the following VSAT
profiles and options:
ATM basic profile
MPEG_TRF MPEG TRF burst formatting support
WIDE_HOPP 120 MHz RCST burst to burst frequency hopping range
FAST_HOPP RCST supports frequency hopping between adjacent time slots
(SatLink 1910 only)
AVBDC RCST supports AVBDC capacity request class
Dynamic_MF_TDMA Dynamic MF_TDMA supported
NEW_PERM RCST supports new permutation as provided through TCT
The SatLabs Qualification for SatLink 1000 and 1910 is verified according to the following standards,
recommendations, and test plans:
SatLabs Outline Test Plan 3.0.
SatLabs System Recommendations v1.2.2.
EN 301 790 v1.4.1. Digital Video Broadcasting (DVB); Interaction channel for Satellite Distribution
Systems
TR 101 790 v1.2.1. Digital Video Broadcasting (DVB); Interaction channel for Satellite Distribution
Systems; Guidelines for the use of EN 301790
The SatLink 2000 has been tested compliant for the following VSAT profile:
DVB-S2 CCM Profile
To Next Page
Loading...