# sw show
SW versions:
Boot : 14.0.0.17
Current : 14.1.0.18
Manual SW upgrade settings:
TFTP server IP addr : 10.10.1.1
File name : new.tgz
Automatic SW upgrade settings:
Activated : Yes
Upgrade status : Waiting
PID : 1411
IP address : 224.1.1.1
Port No. : 57001
Licenses for SW options:
NAT
GRE
MOBILE
PEP-TCP
QOS-4
RAC
PEP-HTTP
VLAN
# sw upgrade satlink-vsat2-14.1.0.19.tgz 10.10.14.8
Software download in progress, please
wait..........................................................................
...........................Download complete
File Transfer complete
Configuration Saved
16.3 Restoring the Backup Software
If, for some reason, the old software must be restored, the following steps have to be executed. The
current SW will be deleted when restoring the backup SW and the configuration used with the backup
SW will be restored and activated.
1. Restore the previous SW and configuration with the command sw restore
Example:
# sw restore
Restoring backup SW 13.0.2.61
Current SW 13.0.2.65 will be deleted
Do you want to continue (Y/N)?y
Backup SW restored. Saving configuration and restarting
Saving Configuration. This will take ~20 secs
Configuration Saved
Restarting Terminal. Connection will be closed
Reconnect when the terminal has restarted (1-2 minutes)
To Next Page
Loading...