2) Start the transmitter by clicking on the Start button and log on to the DVB-RCS network.
Figure 29: Transmitter Configuration
3) Click the Save button to save the configuration.
4) To test the connection to the Hub, select Satellite under the Status option on the SatLink web
interface home page. This displays the Satellite Interface Status page.
5) If the proper connection is established to the Hub, the following status will be displayed on the
Satellite Interface Status page:
State : ―Two-way link established‖
Transmitter : ―On‖
Receiver : ―On‖
To Next Page
Loading...