What to do if insufficient support material for part build in Stratasys F170?
If there is insufficient support material for a part build on your Stratasys 3D printer, install additional support material into the printer.
What to do if my Stratasys 3D Printers shows replace invalid model spool?
Invalid materials are materials not licensed or not compatible with the associated head type. To fix this in your Stratasys 3D printer, remove the invalid material spool and replace it with a valid spool.
What to do if my Stratasys F170 shows replace invalid support spool?
Invalid materials are materials not licensed or not compatible with the associated head type. To fix this in your Stratasys 3D printer, remove the invalid material spool and replace it with a valid spool.
What to do if model material does not match selected job in Stratasys F170?
If the model material does not match the selected job on your Stratasys 3D printer, unload the incorrect model material and load the correct model material for the selected job.
What to do if support material does not match selected job in Stratasys 3D Printers?
If the support material does not match the selected job on your Stratasys 3D printer, unload the incorrect support material and load the correct support material for the selected job.
How to replace empty model spool in Stratasys 3D Printers?
If your Stratasys 3D printer indicates to replace the empty model spool, remove the empty material spool and replace it with a new spool.
How to replace empty support spool in Stratasys 3D Printers?
If your Stratasys 3D printer indicates to replace the empty support spool, remove the empty material spool and replace it with a new spool.
What to do if my Stratasys 3D Printers is out of model material?
If your Stratasys 3D printer is out of model material, remove the empty material spool(s) and replace them as needed.
What to do if end of support filament detected in Stratasys F170 3D Printers?
If your Stratasys 3D printer detects the end of the support filament, slowly turn the material spool and feed filament into the drive mechanism.
How to fix model head not communicating in Stratasys F170?
If the model head is not communicating on your Stratasys 3D printer, open the top cover and unclip the head cable from the model head.
Essential safety guidelines for printer installation, operation, and maintenance.
How to contact Stratasys Customer Support for assistance with printer issues or parts.
Details on items included in the printer's welcome kit, such as documents and cables.
Steps for initial printer setup, including stabilizing the unit and ensuring proper placement.
Guide to setting up wired or wireless network connections for the printer.
Explanation of the printer's navigation menu and its button functions for accessing printer features.
Procedures for managing print jobs, including loading files, starting, pausing, and aborting builds.
How to view and manage material status, load/unload materials, and check head temperatures.
Procedures for calibrating printer tips, including automatic and manual methods for accuracy.
Explanation of the automatic XY Gantry Calibration performed during printer startup for proper movement.
Information on identifying and understanding printer warnings and errors that may affect builds.
A table of common troubleshooting scenarios, their possible causes, and recommended remedies.
General| Build Volume | 254 x 254 x 254 mm (10 x 10 x 10 in) |
|---|---|
| Software | GrabCAD Print |
| Print Technology | Fused Deposition Modeling (FDM) |
| Material Compatibility | ASA |
| Connectivity | USB, Ethernet, Wi-Fi |
| Nozzle Diameter | 0.4 mm |
| Build Plate Temperature | 120°C (248°F) |
| Operating System Compatibility | Windows 7/8/10 |
| Power Requirements | 100–240 VAC, 50/60 Hz |
| Layer Thickness | 0.178 mm or 0.254 mm |
To Next Page
