To Next Page
C
cadamsSep 22, 2025
How to fix close the cover error on Stratasys 3D Printers?
- VVincent HawkinsSep 22, 2025
To resolve the 'Close the cover' message on your Stratasys 3D printer, close the top cover.
How to fix close the cover error on Stratasys 3D Printers?
To resolve the 'Close the cover' message on your Stratasys 3D printer, close the top cover.
When to order new model head for Stratasys 3D Printers?
If your Stratasys 3D printer suggests to order a new model head because it has reached 1350 build hours and is near its odometer limit, you are still able to build using this head, but part quality may be affected.
When to order new support head for Stratasys 3D Printers?
If your Stratasys 3D printer suggests to order a new support head because it has reached 1350 build hours and is near its odometer limit, you are still able to build using this head, but part quality may be affected.
What to do if oven not maintaining temperatures in Stratasys F170 3D Printers?
If the oven is not maintaining temperatures in your Stratasys 3D printer, close the oven door; the heater turns off while the door is open.
How to fix close the door error on Stratasys F170?
To resolve the 'Close the door' message on your Stratasys 3D printer, close the oven door.
What to do if end of model filament detected in Stratasys 3D Printers?
If your Stratasys 3D printer detects the end of the model filament, slowly turn the material spool and feed filament into the drive mechanism.
What to do if my Stratasys F170 is out of support material?
If your Stratasys 3D printer is out of support material, remove the empty material spool(s) and replace them as needed.
When to replace model head in Stratasys F170?
If the model head on your Stratasys 3D printer has reached its odometer limit of 1500 build hours, it is recommended that you change the head prior to starting a new build.
When to replace support head in Stratasys F170?
If the support head on your Stratasys 3D printer has reached its odometer limit of 1500 build hours, it is recommended that you change the head prior to starting a new build.
What to do if insufficient model material for part build in Stratasys F170 3D Printers?
If there is insufficient model material for a part build on your Stratasys 3D printer, install additional model material into the printer.
Essential safety guidelines for printer installation, operation, and maintenance.
How to contact Stratasys Customer Support for assistance with printer issues or parts.
Details on items included in the printer's welcome kit, such as documents and cables.
Steps for initial printer setup, including stabilizing the unit and ensuring proper placement.
Guide to setting up wired or wireless network connections for the printer.
Explanation of the printer's navigation menu and its button functions for accessing printer features.
Procedures for managing print jobs, including loading files, starting, pausing, and aborting builds.
How to view and manage material status, load/unload materials, and check head temperatures.
Procedures for calibrating printer tips, including automatic and manual methods for accuracy.
Explanation of the automatic XY Gantry Calibration performed during printer startup for proper movement.
Information on identifying and understanding printer warnings and errors that may affect builds.
A table of common troubleshooting scenarios, their possible causes, and recommended remedies.
General| Build Volume | 254 x 254 x 254 mm (10 x 10 x 10 in) |
|---|---|
| Software | GrabCAD Print |
| Print Technology | Fused Deposition Modeling (FDM) |
| Material Compatibility | ASA |
| Connectivity | USB, Ethernet, Wi-Fi |
| Nozzle Diameter | 0.4 mm |
| Build Plate Temperature | 120°C (248°F) |
| Operating System Compatibility | Windows 7/8/10 |
| Power Requirements | 100–240 VAC, 50/60 Hz |
| Layer Thickness | 0.178 mm or 0.254 mm |
