How to fix support head not communicating in Stratasys 3D Printers?
If the support head is not communicating on your Stratasys 3D printer, open the top cover and unclip the head cable from the support head.
What to do if model head not initialized in Stratasys F170?
If the model head is not initialized on your Stratasys 3D printer, wait at least 60 seconds after the error is first displayed.
What to do if support head not initialized in Stratasys F170?
If the support head is not initialized on your Stratasys 3D printer, wait at least 60 seconds after the error is first displayed.
What to do if Stratasys F170 is busy?
If your Stratasys 3D printer is busy, wait a couple of minutes and then attempt to restart the build.
How to remove the part from Stratasys F170 3D Printers?
To remove the part from your Stratasys 3D printer, open the oven door and remove the completed part.
How to select a job on Stratasys F170?
To select a job on your Stratasys 3D printer, select the job you’d like to build from the Job Queue.
How to fix cooler module not installed error on Stratasys F170 3D Printers?
If the cooler module is not installed on your Stratasys 3D printer, install the bead cooler.
What to do if Stratasys F170 timed out?
If your Stratasys 3D printer has timed out, remove the material spool and ensure that it is properly prepared for installation and load.
What to do if purge failed on Stratasys F170?
If the purge failed on your Stratasys 3D printer, unload model and support material and then reload these materials.
Essential safety guidelines for printer installation, operation, and maintenance.
How to contact Stratasys Customer Support for assistance with printer issues or parts.
Details on items included in the printer's welcome kit, such as documents and cables.
Steps for initial printer setup, including stabilizing the unit and ensuring proper placement.
Guide to setting up wired or wireless network connections for the printer.
Explanation of the printer's navigation menu and its button functions for accessing printer features.
Procedures for managing print jobs, including loading files, starting, pausing, and aborting builds.
How to view and manage material status, load/unload materials, and check head temperatures.
Procedures for calibrating printer tips, including automatic and manual methods for accuracy.
Explanation of the automatic XY Gantry Calibration performed during printer startup for proper movement.
Information on identifying and understanding printer warnings and errors that may affect builds.
A table of common troubleshooting scenarios, their possible causes, and recommended remedies.
General| Build Volume | 254 x 254 x 254 mm (10 x 10 x 10 in) |
|---|---|
| Software | GrabCAD Print |
| Print Technology | Fused Deposition Modeling (FDM) |
| Material Compatibility | ASA |
| Connectivity | USB, Ethernet, Wi-Fi |
| Nozzle Diameter | 0.4 mm |
| Build Plate Temperature | 120°C (248°F) |
| Operating System Compatibility | Windows 7/8/10 |
| Power Requirements | 100–240 VAC, 50/60 Hz |
| Layer Thickness | 0.178 mm or 0.254 mm |
To Next Page
