11
3. Water Bar Operation
a. Dispensing Cold Water
To dispense cold water, press the marked top right button. Dispensing will
continue while the button is pressed. Please note that continuous dispensing is
limited to 4 minutes.
b. Dispensing a Measured Quantity of Cold Water
To dispense a measured quantity of cold water, briefly press the marked top
right button. Pressing any button during dispensing will stop the action.
c. Dispensing Mixed Water
Mixed water is a mixture of cold water filtered and purified by UV and hot water.
To dispense a measured quantity of warm water at a set temperature, briefly
press the bottom left button. Pressing any button during dispensing will stop
the action.
When child lock is on, it is necessary to press the marked bottom left button
and also briefly press the marked top right button. It is not necessary to
continue pressing the top right button during dispensing.
Caution! The mixed water is dispensed from 2 different nozzles. When
dispensing into a narrow neck bottle, use a funnel, or first dispense into a wide
neck jug.
Note: When the hot water temperature is low, the mixed water cup on the
display will be dimmed and dispensing will not be possible. When pressing the
mixed water button, the hot water progress bar will advance, the water will
start to heat until it reaches the dispensing temperature. When the dispensing
temperature is reached, the color of the hot and mixed cups on the display will
fill up.
PRESS ANY KEY TO STOP
To Next Page
Loading...