EasyManua.ls Logo

Strauss water Bubble PLUS - Water Bar Maintenance and Care; Filter and Lamp Replacement

Default Icon
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
6. Water Bar Maintenance & Periodic Care
a. Emptying the Drip Tray
It is important to empty the drip tray on time (before it fills up). Order of
operations for emptying the drip tray.
(1) Close the folding tray. Wait a few seconds for the leftover water to drain into
the drip tray.
(2) Gently pull the drip tray to remove it without spilling the water. The purpose
of the drip tray is to collect excess drops from the water bar, do not use it for
other purposes.
b. Filter and UV Lamp Replacement
To main the quality of water and the soundness of the water bar, be sure
to replace the UV lamp every 12 months, and the filter every 6 months or
2,000 liters, whichever occurs earlier. Replacing the parts is easy and simple and
detailed replacement instructions are attached to the replacement lamps and
filters.
Prior to replacing the parts, read the attached instructions.
Note - The purification process is internal and protected. The water bar is
equipped with a mechanical mechanism that prevents turning on the lamp
outside its defined position.
Caution! UV-C radiation is hazardous to the eyes and skin.
c. Filter Replacement Instructions
1. Removing the filter: Remove the water bars top cover.
Press the PUSH button and pull the filer upwards using the extraction ribbon.
2. Inserting the filter: Remove the wrapping from the new filter.
Insert the new filter until you hear a click.
3. Water Dispensing:
Place a container beneath the dispensing spout.
Dispense about 4 jugs of cold water until a regular flow is achieved.
Warning!
Do not dispense hot water
while replacing the filter.

Table of Contents

Related product manuals