12
*Please note! Due to variations in the water flow rate, the set quantity may vary. After dispensing it is
important to check that the required quantity
was received (especially when preparing food for infants,
medications etc.). In the event of quantity variations, the required quantity can be redefined.
d. Dispensing Hot Water
To dispense hot water, press the marked top right button.
The dispensing will continue while the button is pressed.
Note: When the hot water temperature is low, the hot water cup on the
display will be dimmed and dispensing will not be possible. When pressing
the hot water button, the hot water progress bar will advance, the water will
start to heat until it reaches the dispensing temperature. When the dispensing
temperature is reached, the color of the hot cup on the display will fill up.
e. Dispensing a Measured Quantity of Hot Water
To dispense a measured quantity of hot water, briefly press the marked top left
button.
Pressing any button during dispensing will stop the action. It is not possible to
dispense a measured amount of hot water when child lock is on.
Note: The dispensing a measured quantity of hot water function can be
canceled.
*Please note! Due to variations in the water flow rate, the set quantity may vary. After dispensing it is
important to check that the required quantity was received (especially when preparing food for infants,
medications etc.). In the event of quantity variations, the required quantity can be redefined.
PRESS ANY KEY TO STOP
To Next Page
Loading...