Strauss water Bubble PLUS - Initialization; Restoring Factory Settings

30
k. Initialization
This option enables performing 2 different actions. The first is initializing all
the water bar settings and restoring them to the factory defaults. The second
option enables resetting the smart heating data (the hot water usage data)
learned by the water bar.
k.1. Restoring Factory Settings
This option enables initializing and restoring all the water bar’s default settings:
Clock – 24 hour display Cold water quantity/temp. – 200 ml at
4 degrees Celsius
Language – Hebrew Mixed water quantity/temp. – 200 ml at
50 degrees Celsius
Child lock – On Energy saving mode – On
Jug of cold water – 1 liter Jug of sparkling water quantity – 1 liter
Smart heating – On Sparkling level – Regular
Beep on press – On
Automatic wakeup – Off
To restore the aforementioned settings, enter the RESTORE FACTORY SETTINGS
sub menu.
To restore the settings, select the YES option using the top right
and bottom
right buttons.
To confirm, press the button.
FACTORY SETTINGS
Are you sure you want
to reset to the
factory settings?
NO
YES
MENU MAINTENANCE RESET RESTOR FACTORY SETTINGS