Strauss water Bubble PLUS - Settings Menu Actions

23
5. Actions in the Settings Menu
a. Clock
A clock will appear on the display when the water bar is connected to the
electricity supply. It the event of an electricity outage lasting longer than
8 hours, the clock will need to be reset.
a.1. Time & Day Adjustment
To set the clock, enter the CLOCK sub menu.
MENU CLOCK SET TIME & DAYSETTINGS
The hour will appear on the display.
Setting hour/minutes/day is performed using the top right
and the
bottom right buttons.
To confirm, press the
button.
SET TIME & DAY
07:30
SUNDAY
AM
*Please note! Setting the hour and day is recommended for efficient
operation of the smart heating system.
a.2. Setting Clock Format
You can choose between a 12 or 24 hour clock.
MENU CLOCK CLOCK FORMATSETTINGS
The top right and the bottom right buttons will switch between the
12 HOURS and 24 HOURS options.
To confirm, press the button.
CLOCK FORMAT
24 HOURS
12 HOURS
*Please note! When the clock is set to 24 HOURS, AM/PM will not appear
alongside the hour.