Strong SRT 8119 User Manual

NOTE: Availability of Audio tracks, Teletext data and Subtitles depends on
broadcast.
7.5 AV Setting
Use this menu to match your receiver to your TV set.
The following settings are available:
Resolution If the video quality does not appear correctly, change the setting. These
settings match the most common settings for HDMI.
576i: For analogue TVs (on Scart connection).
576p: For digital SD TVs (some digital TVs do not support this mode).
720p: For digital HD TVs (on HDMI connection).
1080i: For digital HD TVs (on HDMI connection).
1080p: For digital HD TVs (on HDMI connection).
Aspect Mode: Select the aspect ratio that matches your TV. This is either a 4:3 or a 16:9
possibility. Select in combination the preferred conversion method how to
show a 16:9 programme on a 4:3 TV, or a 4:3 programme on a 16:9 TV. The
options are:
Auto A 16:9 or a 4:3 program will be show according to the content data included
in the broadcast.
4:3 Letterbox The full 16:9 programme will be displayed on your 4:3 TV set with black bars
above and below the picture
4:3 Pan Scan A centre cut-out of the 16:9 programme will be displayed full-screen on your
4:3 TV, missing content to the left and right.
16:9 Letterbox A 4:3 programme will be shown normally on a 16:9 screen, but with black
bars to the left and right.
16:9 Pan Scan A 4:3 programme will be shown as a centre blow up to ll the whole 16:9
screen, missing content to the left, right, top and bottom of the programme.
Video Eects Options are: Default, Vivid, and Standard. Colours and Luminance can be
adapted to your taste or screen
Audio Output Audio available on the S/PDIF connector. Options are: PCM Output, Force
SPDIF Out. Bitstream Output
PCM Output will only forward PCM 2.0 audio format to the output. Bitstream
Output will also forward compressed Dolby Digital 5.1 to the S/PDIF, if available. Force SPDIF Out will
only forward audio to the S/PDIF connector, not on HDMI or SCART.
Audio Description Audio Description can be oered by a broadcaster as a service to Visual
Impaired people. The video content will be described by a narrator. When set
to On, if the AD track is available, will be mixed automatically with the original
sound.
AD Volume Oset The volume of the AD track can be adapted to make a better mix with the
original sound.
HDMI CEC Implementation of CEC is not equally by TV manufacturers. Usually, it works
good between equipment from one manufacturer. If it causes problems,
select O.
14

Strong SRT 8119 Specifications

General

Aspect ratio	4:3, 16:9
Signal source	Terrestrial
Video resolutions	720 x 576, 1280 x 720, 1920 x 1080 pixels
Supported video modes	576i, 576p, 720p, 1080i, 1080p
Analog signal format system	NTSC, PAL, VHF
Digital signal format system	DVB-T2
High Dynamic Range (HDR) supported	Yes
Personal Video Recorder (PVR) included	-
Tuner type	Analog & digital
Demodulation	16-QAM, 64-QAM, 128-QAM, 256-QAM, COFDM
Product color	Black
Audio decoders	Dolby Digital Plus
Number of tuners	- tuner(s)
Audio output channels	- channels
Audio formats supported	AC3, MPEG-1, MPEG-2
Video formats supported	H.264, HEVC/H.265, MPEG4-ASP
Flash memory	4 MB
Internal memory	64 MB
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	4 W
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	91.1 mm
Width	145 mm
Height	35.5 mm
Weight	145 g