Name: Strong SRT 8119
Brand: Strong
Rating: 5 (1 reviews)

To Next Page

To Previous Page

TABLE OF CONTENTS

1.0 INTRODUCTION 3

1.1 Safety Instructions 3

1.2 Storage 4

1.3 Equipment Set-up 4

1.4 Accessories 4

1.5 Usage of external USB devices 5

2.0 YOUR RECEIVER 5

2.1 Default PIN-CODE: 0000 5

2.2 Front Panel 5

2.3 Rear Panel 5

2.4 Side Panel (Left) 6

2.5 Remote Control 6

2.6 Installing the batteries 7

2.7 Using the remote control 7

3.0 CONNECTION 7

3.1 Connecting to a terrestrial antenna 7

3.2 Connecting to TV with HDMI cable 7

3.3 Connecting to TV with SCART cable 7

3.4 Connecting to a Digital Audio Amplier with S/PDIF 7

3.5 Connecting to a Digital Audio Amplier and TV using HDMI 8

3.6 Connecting a USB storage device 8

4.0 STARTING UP FOR THE FIRST TIME 8

5.0 QUICK GUIDE TO USING YOUR RECEIVER 9

6.0 OPERATION 9

6.1 Changing channels 9

6.2 Info Banner 10

6.3 Selection of audio language 10

6.4 Teletext 10

6.5 Subtitles 10

6.6 Timeshift 10

6.7 EPG (Electronic Programme Guide) 11

6.8 Instant Recording 11

7.0 MAIN MENU 11

7.1 Channel List 11

7.3 Installation 13

7.4 Language 13

7.5 AV Setting 14

7.6 Local Time Setting 15

7.7 System 15

7.8 Multimedia 16

A.1 TROUBLESHOOTING 17

A.2 TECHNICAL SPECIFICATIONS 21

Questions and Answers:

Need help?

Do you have a question about the Strong SRT 8119 and is the answer not in the manual?

Strong SRT 8119 Specifications

General

Aspect ratio	4:3, 16:9
Signal source	Terrestrial
Video resolutions	720 x 576, 1280 x 720, 1920 x 1080 pixels
Supported video modes	576i, 576p, 720p, 1080i, 1080p
Analog signal format system	NTSC, PAL, VHF
Digital signal format system	DVB-T2
High Dynamic Range (HDR) supported	Yes
Personal Video Recorder (PVR) included	-
Tuner type	Analog & digital
Demodulation	16-QAM, 64-QAM, 128-QAM, 256-QAM, COFDM
Product color	Black
Audio decoders	Dolby Digital Plus
Number of tuners	- tuner(s)
Audio output channels	- channels
Audio formats supported	AC3, MPEG-1, MPEG-2
Video formats supported	H.264, HEVC/H.265, MPEG4-ASP
Flash memory	4 MB
Internal memory	64 MB
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	4 W
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %