EasyManuals Logo

Strong SRT 8119 User Manual

Strong SRT 8119
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
English
1.0 INTRODUCTION
1.1 Safety Instructions
Read all of the instructions before operating the device. Keep these instructions well for later use.
Only use attachments/accessories specied or provided by the manufacturer (such as the
exclusive supply adapter, battery etc.).
Please refer to the information on the product enclosure for electrical and safety information
before installing or operating the apparatus.
To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
The ventilation should not be impeded by covering the ventilation openings with items, such
as newspaper, table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or splashing and no objects lled with liquids,
such as vases, shall be placed on the apparatus.
This mark indicates a risk of electric shock.
To prevent injury, this apparatus must be securely attached to the oor/wall in accordance with
the installation instructions.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent types.
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as
sunshine, re or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Listening to music at high volume levels and for extended durations can damage one’s hearing.
In order to reduce the risk of damage to hearing, one should lower the volume to a safe,
comfortable level, and reduce the amount of time listening at high levels.
The mains plug or appliance coupler is used as disconnect device, it shall remain readily
operable. When not in use and during movement, please take care of the power cord set, e.g. tie
up the power cord set with cable tie or something like that. It shall be free from sharp edges or
similar which can cause abrasion of the power cord set. When put into use again, please make
sure the power cord is not damaged. The absence of a light indication on the apparatus does
not mean that it is fully disconnected from the mains. To disconnect the apparatus completely,
the mains plug must be pulled out.
Attention should be drawn to environmental aspects of battery disposal.
No naked ame sources, such as lighted candles, should be placed on the apparatus.
To prevent the spread of re, keep candles or other open ames away from this product at
all times.
Equipment with this symbol is a Class II or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to electrical
earth.
Precautions
Never try to open the device. It is dangerous to touch the inside of the device due to high
voltages and possible electrical hazards. Opening the device will void the warranty of the
product. Refer all maintenance or servicing to suitably qualied personnel.
When you are connecting cables, be sure that the device is disconnected from the mains
supply voltage. Wait a few seconds after switching o the device before you move the device or
disconnect any equipment.
3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Strong SRT 8119 and is the answer not in the manual?

Strong SRT 8119 Specifications

General IconGeneral
Aspect ratio4:3, 16:9
Signal sourceTerrestrial
Video resolutions720 x 576, 1280 x 720, 1920 x 1080 pixels
Supported video modes576i, 576p, 720p, 1080i, 1080p
Analog signal format systemNTSC, PAL, VHF
Digital signal format systemDVB-T2
High Dynamic Range (HDR) supportedYes
Personal Video Recorder (PVR) included-
Tuner typeAnalog & digital
Demodulation16-QAM, 64-QAM, 128-QAM, 256-QAM, COFDM
Product colorBlack
Audio decodersDolby Digital Plus
Number of tuners- tuner(s)
Audio output channels- channels
Audio formats supportedAC3, MPEG-1, MPEG-2
Video formats supportedH.264, HEVC/H.265, MPEG4-ASP
Flash memory4 MB
Internal memory64 MB
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power consumption (standby)1 W
Power consumption (typical)4 W
Storage temperature (T-T)-10 - 50 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth91.1 mm
Width145 mm
Height35.5 mm
Weight145 g

Related product manuals