Strong SRT 8119 User Manual

English
Forgotten channel lock
code.
Contact your local Service Hotline
or send an email to our Support via
www.strong.tv
Playback of video (or
Timeshift) is causing
picture freeze/macro
blocks or similar distortion,
especially on HD content.
The read/write speed of your
USB device could be too low.
Make sure to use a USB storage
device with sucient speed and
space. Pen drives (‘USB sticks’) may
not support sucient speed.
The USB storage device is
not working properly.
The power consumption is
too high.
Connect an extra power supply
adapter to your USB HDD device.
The USB device is formatted
incorrectly.
Format the USB device on a PC
to FAT32.
Recording is no longer
possible.
The selected storage medium
is full.
Delete existing recording(s).
Attach and use another storage
medium.
The receiver automatically
switches o after a certain
time.
The Auto Standby function
is enabled.
Check the Auto Standby setting
and disable if necessary.
A.2 TECHNICAL SPECIFICATIONS
Memory and System:
CPU Montage 2205 SOC
Flash memory: 4 MB
SDRAM: 64 MB (SOC)
Tuner
Input connector: IEC60169-2, female, 75 Ohm nominal
Input frequency range: VHF: 174 ~ 230 MHz
UHF: 470 ~ 862 MHz
Input signal level: DVB-T2: -70 dBm ~ -25 dBm
Antenna power: 5 V DC, max. 50 mA, short cut protected
Demodulator
Demodulator: COFDM 16QAM/64QAM/128QAM/256QAM
21

Strong SRT 8119 Specifications

General

Aspect ratio	4:3, 16:9
Signal source	Terrestrial
Video resolutions	720 x 576, 1280 x 720, 1920 x 1080 pixels
Supported video modes	576i, 576p, 720p, 1080i, 1080p
Analog signal format system	NTSC, PAL, VHF
Digital signal format system	DVB-T2
High Dynamic Range (HDR) supported	Yes
Personal Video Recorder (PVR) included	-
Tuner type	Analog & digital
Demodulation	16-QAM, 64-QAM, 128-QAM, 256-QAM, COFDM
Product color	Black
Audio decoders	Dolby Digital Plus
Number of tuners	- tuner(s)
Audio output channels	- channels
Audio formats supported	AC3, MPEG-1, MPEG-2
Video formats supported	H.264, HEVC/H.265, MPEG4-ASP
Flash memory	4 MB
Internal memory	64 MB
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	4 W
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	91.1 mm
Width	145 mm
Height	35.5 mm
Weight	145 g