English
NOTE: Audio Description depends on the broadcaster inserting such an
accompanying audio track.
7.6 Local Time Setting
Region Select the region or country you live in. This will determine about eg. time
zone, character sets and the use of LCN.
GMT Usage The current time obtained from the broadcast will be shown here, if set to By
Region (Default). If set to O you may adapt the time and date to whatever
you like. If, in rare cases, a broadcaster should omit to send a signal for
Daylight saving time, you can adapt the time by +1 hour, if GMT Usage is set
to User Dene.
7.7 System
Setup some system own features for maintenance, network and protection.
System Information This submenu shows receiver specic information such as hardware and
software version. Please have the System Information screen on hand when
you call our hotline. The person who answers your call might ask for the
information given in this screen.
Factory Setting Reset your receiver to the default factory settings. Sometimes useful if the
unit suddenly behaves in an unexpected manner, e.g. after a power failure.
Select System then Factory Setting. Enter your password. Conrm by selecting
Yes. Note: This option will delete all your channels, Favourite lists and settings.
The receiver will reboot and start with the initial Installation menu.
Timer List See the booked timers list and edit if needed, use the BLUE and RED and OK
buttons to add, delete and edit an entry manually.
Timer List can be quickly accessed (shortcut) by pressing BLUE in normal viewing mode.
OSD Setting Adapt the On Screen Display (OSD) to your liking.
OSD Timeout Sets the time in seconds for how long the program banner will be shown.
OSD Transparency Sets the level of transparency compared to the running video content.
Switch Mode Options are: Black Screen and Video Freeze. Sets the image when zapping
between channels. Have a black screen or keep the last video frame until the
next channel opens.
USB Update App All This feature allows you to update the receiver software via the USB port.
When a new software is available for your receiver, it can be downloaded
from our website. Place the software le (unzipped) in the root directory of
your USB storage device (HDD, memory stick etc.) and connect the device
to the USB port of the receiver. First a message box will appear that a USB
device is found. Then go to the System menu and select the USB Update
option. At Upgrade Mode select App All and then select the correct le in the
list. Select Start and press OK to start update. When ready, the unit will reboot
automatically.
15
To Next Page
Loading...
Need help?
General
Weight and Dimensions
