BBUUTTTTOONN NNAAMMEE FFUUNNCCTTIIOONN
RESET HOURS
CONFIRMATION
Touch to apply reset selection.
RESET VOLUME
Touch to access the RESET VOLUME dialog and reset
the canister fluid volume value to zero.
RESET VOLUME
CONFIRMATION
Touch to apply reset selection.
RETURN
Touch to exit a dialog and return to a previous dialog
menu.
SET AS DEFAULT OFF
(DOCKING)
From the DOCKING dialog menu, touch the SET AS
DEFAULT button to enable or disable the default cycle to
be performed when the rover is connected to the docker.
The NORMAL WASH cycle or the EXTENDED WASH
cycle may be selected as the DEFAULT.
SETTINGS
Touch to access the SETTINGS dialog menu. Select and
adjust the system settings, as required, including
BRIGHTNESS, SOUND, AND PREFERENCES. See
To
Adjust the Settings
(page 34).
SOUND (SETTINGS)
Touch to access the SETTINGS dialog menu. Touch the
SOUND button to access the SOUND dialog menu.
Touch the UP and DOWN arrows to increase or
decrease the volume or loudness of the audible
indicator. See Audible Event Indicators.
SPECIMEN LIGHT
(BRIGHTNESS)
From the BRIGHTNESS dialog menu, touch the
SPECIMEN LIGHT button. Touch the UP and DOWN
arrows to increase or decrease the brightness.
SPECIMEN LIGHT
(CONTROL)
Touch to turn ON or OFF the light that illuminates the
contents of the specimen collection manifold.
START SUCTION Touch to start fluid suction.
STOP SUCTION
Touch to stop fluid suction.
SURFACE LIGHT
(BRIGHTNESS)
From the BRIGHTNESS dialog menu, touch the
SURFACE LIGHT button. Touch the UP and DOWN
arrows to increase or decrease the brightness.
SURFACE LIGHT
(CONTROL)
Touch to turn ON or OFF the light provided for the work
surface.
EN 26 700000969828 Rev-AA
To Next Page
Loading...
Need help?
General
