50 6506-209-001 REV F www.stryker.com
Operation
Installing the child restraint with X-restraint package (Continued)
12. While holding the tension, close the rear facing lock-off on the buckle side to hold the tension (Figure 35 on page 50
).
Figure 34: Restraint location Figure 35: Rear facing lock-off
13. Close the rear facing lock-off on the opposite side.
14. Place the baby into the child restraint and secure per manufacturer’s instructions.
Installing the defibrillator platform
CAUTION
• Always secure the defibrillator platform to the product when you use the defibrillator platform.
• Always use and adjust the straps that are provided with the defibrillator platform to secure the defibrillator.
• Always change the installation location or adjust the straps for your specific defibrillator size or shape.
• Do not load the defibrillator platform above the safe working load of 30 lb (13.6 kg).
To install the defibrillator platform:
1. Place the defibrillator platform in the stored position (Figure 36 on page 51).
To Next Page
Loading...
