EasyManua.ls Logo

Stryker Power-PRO XT - Installing the Optional Base Storage Net; Installing the Backrest Storage Pouch

Stryker Power-PRO XT
87 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.stryker.com 6506-209-001 REV F 57
Operation
Attaching an oxygen bottle to the retractable head section oxygen bottle holder
(Continued)
Inspect the straps and clips for wear between use. Replace the strap if it no longer holds the oxygen bottle.
Installing the optional base storage net
CAUTION
Do not load the base storage net above the safe working load of 20 lb (9 kg).
Always be careful when you retract the base to avoid damaging items that are stored in the base storage net.
To install the base storage net, wrap the Velcro® straps around the base tubes.
Installing the backrest storage pouch
CAUTION
Do not load the backrest storage pouch above the safe working load of 20 lb (9 kg).
Do not allow the storage pouch to interfere with the operation of the retractable head section.
To install the backrest storage pouch (Figure 47 on page 58):
1. Insert each strap through a hole in the backrest skin.
2. Mount the pouch flat against the backrest.
3. Secure the backrest storage pouch to the cot with the Velcro straps.

Table of Contents

Other manuals for Stryker Power-PRO XT

Related product manuals