Stryker Secure 3000 - Litter Assembly Diagram G

203 pages

To Next Page

To Previous Page

Litter Assembly

116

Detail A

Litter Pivot Joints

Typical (6) Places

Assembly part number 3001–300–1

Main Page

Table of Contents2
Introduction5
- Specifications5
- Warning / Caution / Note Definition5
- Safety Tips and Guidelines6
Limited Warranty7
- Return Authorization8
- Freight Damage Claims8
- Service Contract Coverage8
Replacement Parts List9
Preventative Maintenance10
- Cleaning10
- Maintenance Checklist11
Set-Up Procedures12
Bed Illustration13
Brake Pedal Operation14
Steer Pedal Operation14
CPR Emergency Release Usage15
Foley Bag Hooks Usage15
Foot Prop Usage15
Fracture Frame Usage15
I.V. Poles16
Night Light Usage17
Patient Restraint Strap Locations17
Chart Rack Usage18
CPR Board Usage18
Positioning Siderails19
Siderail Control Panel Lights19
Inside Siderail Function Guide20
Outside Siderail Function Guide21
Dynamic Mattress System Usage22
Foot Board Control Panel Guide23
Foot Board Control Panel Guide24
Weigh System Operation Guide26
Static Discharge Precautions30
Troubleshooting31
- Troubleshooting Guide32
- Troubleshooting33
- Bed Component and Wiring Diagram35
- Bed Circuit Boards43
Maintenance Procedures54
- Brake Pedal Replacement54
- Brake Sensor Replacement55
- Steer Wheel Cable Replacement and Adjustment56
- Caster Replacement59
- Lift Motor and Capacitor Removal and Replacement60
- Lift Motor Isolation Plate Replacement61
- Lift Motor Isolation Plate Replacement62
- Lift Housing Removal and Replacement63
Maintenance Procedures (Continued)63
- Lift Motor Coupler Replacement65
- Lift Potentiometer Replacement and Adjustment67
- Lift Potentiometer "Burn-In" Procedure68
- Lift Potentiometer Replacement and Adjustment68
- Power and Sensor Coil Cord Replacement69
- Motion Interrupt Switch Replacement71
- Knee Motor Limit Setting72
- Cam and Cam Guide Replacement - Head and Knee Motors73
- Cam and Cam Guide Replacement – Head and Knee Motors74
- Knee Motor Drive Screw and Nut Replacement75
- Knee Motor Removal and Replacement77
- Head Motor Limit Setting78
- Head Motor Removal and Replacement79
- Head Motor Removal and Replacement80
- Head Motor Drive Isolator and CPR Decoupler Removal and Replacement81
- Head Motor Drive Screw and Ball Nut Replacement82
- CPR Cable Adjustment and Replacement84
- CPR Handle Replacement84
- Weigh System Diagnostic Procedure87
- Load Cell Replacement89
- Power Board Replacement91
- Litter CPU Board Replacement91
- Main CPU Board "Burn-In" Procedure92
- Power Cord Replacement93
- Siderail Cover Removal94
- Molded Siderail Replacement95
- Head End Siderail Cable Replacement96
- Siderail Assembly Removal98
- Foot Board Hinge Removal99
- Foot Board Module Replacement99
- Foot Board Interface Plug Replacement100
- Base Assembly101
- Base Assembly107
- Lift Assembly (Common)109
- Lift Assembly (Head End)111
- Lift Assembly (Foot End)112
- Litter Assembly113
- Litter Assembly121
- Litter Assembly, Mechanical122
- Litter Assembly, Mechanical126
- Fowler Limit Assembly127
- Gatch Motor Assembly128
- Gatch Screw Assembly129
- Fowler Drive Assembly132
- Lift Header Assemblies133
- Litter Assembly, Electrical135
- Litter Assembly, Electrical141
- Litter Assembly, Scale And/Or Bed Exit Option142
- Litter Assembly, Scale And/Or Bed Exit Option146
- Litter Assembly, 110V Outlet Option147
- Litter Assembly, 110V Outlet Option148
- Litter Assembly, DMS Option151
- Litter Assembly, Night Light Option151
- Litter Assembly, DMS Option152
- Head End Siderail Assembly164
- Head End Siderail Assembly175
- Foot End Siderail Assembly178
- Foot Board Assembly183
- Removable I.V. Pole Assembly185
- Removable I.V. Pole Mounting Assembly190
- Permanently Mounted I.V. Pole Assembly191
- Litter Roller Option Assembly194
- Bed Extender Assembly195
  - Bed Extender Assembly196
  - Bed Extender Assembly197
- Bed Extender Assembly198
- Bed Assembly199
- Bed Assembly200

Stryker Secure 3000 - Litter Assembly Diagram G

Table of Contents

Other manuals for Stryker Secure 3000

Related product manuals