Stryker Secure 3000 - Introduction and Specifications; Bed Specifications; Warning, Caution, and Note Definitions

Introduction
4
INTRODUCTION
This manual is designed to assist you with the maintenance of the Secure 3000 Bed. Read it thoroughly be-
fore beginning any maintenance on the equipment.
SPECIFICATIONS
Maximum Weight Capacity 500 pounds (227 kilograms)
Overall Bed Length/Width 93” / 42–1/2”
Patient Sleep Surface 84” / 35”
Bed Height (to top of seat litter) 16” / 29–1/2”
Knee Gatch Angle 0 to 40
Fowler Angle 0 to 60
Trendelenburg/Reverse Trendelenburg –11 to +11
Weigh System Accuracy (optional equipment)  1% of total patient weight while the bed is
level and up to a 4 or –4 angle
 3% of total patient weight from 5 to 11
angle or –5 to –11 angle
Electrical Requirements – all electrical requirements
meet UL 544 specifications.
110 VAC, 60 Hz, 10.0 Amp.
WARNING / CAUTION / NOTE DEFINITION
The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.
WARNING
The personal safety of the patient or user may be involved. Disregarding this information could result in injury
to the patient or user.
CAUTION
These instructions point out special procedures or precautions that must be followed to avoid damaging the
equipment.
NOTE
This provides special information to make important instructions clearer.