Foot Board Operation Guide
25
WEIGH SYSTEM CONTROL PANEL GUIDE
1. LCD – displays patient weight.
2. Push to zero bed.
3. Push when changing equipment on the bed.
4. Push to change weight from pounds to kilograms or back.
5. Push to turn weight system on.
6. Push to decrease numerical value of displayed weight.
7. Push to increase numerical value of displayed weight.
NOTE
After approximately 30 seconds of idle time, the scale display will turn off and will show the Trendelenberg
angle of the bed. Press “SCALE ON” to return to the weight display.
SYMBOL ACTION DISPLAY
To prepare bed for new patient:
Press and hold ”SCALE ON”. ”LET GO FOR SCALE”
Release the button after the ”WEIGHING...”
display reads: ”XXX.X LB”
”LET GO FOR SCALE”
Press and hold ”ZERO””HOLD TO ZERO WT.”
”RELEASE TO ZERO”
Release ”ZERO””DO NOT TOUCH BED”
”0.0 LB”
1
SCALE
ON
ZERO
To Next Page
Loading...
