Stryker Secure 3000 - Page 27

Foot Board Operation Guide
26
WEIGH SYSTEM CONTROL PANEL GUIDE (CONTINUED)
SYMBOL ACTION DISPLAY
To add or remove equipment
during patient stay without
affecting registered patient
weight:
Press and release ”SCALE ON””WEIGHING...”
”XXX.X LB”
Press ”HOLD TO START”
”RELEASE TO START”
Release ”DO NOT TOUCH BED”
”ADD/REMOVE EQUIP.”
Add or remove equipment.
Press ”RELEASE TO FIN.”
Release ”DO NOT TOUCH BED”
”XXX.X LB”
To convert the patient’s weight:
To convert the patient’s weight ”WEIGHT NOW KGS”
to kilograms, press and release ”XXX.X KG”
”LBS./KG.”
Repeat the procedure to return to
pounds.
To change the numerical value
of displayed weight:
Press and hold to scroll to ”HOLD TO DEC. WT.”
desired weight. ”XXX.X LB”
Press and hold to scroll to ”HOLD TO INC. WT.”
desired weight. ”XXX.X LB”