English
EN
www.stryker.com KK-7500 REV 02 1-7
Summary of safety precautions
CAUTION (CONTINUED)
• Always make sure that you wipe each product with clean water and thoroughly dry each product after cleaning.
Some cleaning products are corrosive in nature and may cause damage to the product if you use them improperly.
If you do not properly rinse and dry the product, you may leave a corrosive residue on the surface of the product
that could cause premature corrosion of critical components. Failure to follow these cleaning instructions may void
your warranty.
Pinch points
Figure 1-1: SV2 pinch points
To Next Page
Loading...
Need help?
General
