Stryker SV2 Operation Manual

English
EN
1-18 KK-7500 REV 02 www.stryker.com
Operation
Charging the battery (Continued)
To charge the battery, connect the product to a wall outlet. The battery has a full charge within 10 to 12 hours.
Storing the battery long term
WARNING
Always unplug the battery cable from the control box before you store the product for a long period of time.
CAUTION
Do not place or store heavy objects on the product.
Store the battery per the environmental conditions listed in the specifications section (see Specifications on page 1-9).
To store the battery:
1. See Plugging or unplugging the product on page 1-17.
2. See Plugging or unplugging the battery cable on page 1-16.
Storing the power cord
WARNING
• Always store the power cord before transporting the product.
• Always store the power cord to avoid the risk of entanglement, damage to the power cord, or potential shock
hazards. If the power cord is damaged, remove the product from service and contact the appropriate maintenance
personnel.
CAUTION
Do not squeeze or pinch the power cord in the bed frame.
To store the power cord, wrap the power cord around the cord wrap (A) underneath the head end of the product (Figure
1-6 on page 1-18).
Figure 1-6: Storing the power cord

Stryker SV2 Specifications

General

Brand	Stryker
Model	SV2
Category	Medical Equipment
Language	English