28
4
INSTALLATIONSTÛV 21
.2 OPTION: ADJUSTABLE STANDS
Step 11 Unscrew the fireplace from the
pallet.
Step 12 Insert the Stûv handles into
the holes provided for this purpose and
remove the pallet from under the fireplace.
Step 13 Protect the floor with a transport
blanket or cardboard and two planks of
wood.
Lay the fireplace on the wood planks to
facilitate handling and to protect the unit
and the floor.
OPTION: ADJUSTABLE STANDS
!
Step 14 Cut the adjustable stand with
a disc cutter according to the cut-off
dimension calculated on the previous
page.
Step 15 Using a flathead screwdriver,
remove the four access squares for the
adjustable stands.
Step 16 Using a hammer, insert the
adjustable stands into the access squares
you just cleared.
x4
1514
131211
16
To Next Page
Loading...
