5
1
CERTIFICATIONSTÛV 21
.1 SAFETY INSTRUCTIONS
Tested and certified by CSA
as for standard:
ULC-S610:2018 & UL 127 - 9
th
Edition
EPA Not applicable for decorative wood burning fireplaces
CHIMNEY TYPE : UL-103HT or ULC-S629
This wood heater must be installed in
accordance with standard CSA B365
(Canada) or N.F.P.A. 211 (United
States), the Installation Code for
Solid-Fuel-Burning Appliances and
Equipment, the applicable building
code and standards applicable to
the structure in which the insert will be
installed.
The instructions for the installation
of this wood heater comply with the
above-mentioned standards. They
must be closely followed to eliminate
the risk of serious problems.
This Stûv unit must be installed by
a qualified professional. Improper
installation could result in a fire.
To reduce the risk of fire, read this
manual carefully before installing or
using the wood heater. If the installation
instructions are not followed and the
wood heater is improperly installed, the
risk of incident increases. This can result
in fire, property damage, bodily injury
and even death.
Keep these instructions for future
reference.
NOTE
We strongly recommend that our products be installed
and maintained by professionals certified by the
Association des Professionnels du Chauffage if you are
in Quebec or by Wood Energy Technical Training for the
rest of Canada, and by the National Fireplace Institute
in the United States.
!
This Stûv fireplace must be registered to be covered by the
warranty. Please refer to the last section of this document for
guidance.
The marking label is located on the cap shown above. The
product serial number can be found on the riveted label above
the hearth. You will find all the information you need to register
your product.
Serial #
Details p.7
Marking
label
USC
To Next Page
Loading...
