55
6
USESTÛV 21
.5 RELOADING THE FIRE
Step 1 Slowly slide the glass upwards to
prevent a back draft.
Step 2 Add wood using the Stûv glove
supplied with the unit.
Step 3 Close the glass door and enjoy the
fire.*
*It is normal to feel resistance when lifting
the glass door when the fire is burning.
3
21
Step 1 Wait until the ashes are cold before
removing them from the combustion
chamber.
Step 2 Use an ash shovel to remove ash.
Place the ashes in a metal bucket.
Step 3 Place the bucket filled with
ashes on a non-combustible floor. Be
sure to keep the bucket away from any
combustible material.
NOTE
Before they can be disposed of, ashes should be kept in a non combustible
bucket with a tight lid until they have cooled completely.
Remove the ashes regularly. Burning ashes can damage the lower glass door
seal. This deterioration is not covered by the warranty.
!
* Leaving 1" of ash bed after
each use helps
start the next fire.
6
.6 ASH REMOVAL
Non combustible
To Next Page
Loading...
