58
7
ENTRETIENSTÛV 21
.2 ANNUAL MAINTENANCE
987
654
CAUTION
The cable must be held tight to make sure
not to lose it!
!
Step 4 Place a support and/or a cloth to
remove the door and avoid damaging the
paint
Step 5 Unhook the cables from the door
and attach them in standby mode.
Step 6 Slide the pane as far as it will go to
gain access to the side rails.
Step 7 Lubricate both sides (top and
bottom) of both rails with the high-
temperature lubricant (15 g tube - supplied
with the fireplace).
Step 8 Slide the glass pane towards the
fireplace and replace the 2 counterweight
cables on the sliding parts.
Step 9 Slide the glass pane ± 4 cm and
wipe the magnets with a cloth to remove
any metal residue that may have stuck to
them.
To Next Page
Loading...
