Need help?Do you have a question about the STW TC1 and is the answer not in the manual?
General| Brand | STW |
|---|---|
| Model | TC1 |
| Category | Controller |
| Language | English |
Describes the TC1's on-board, wireless, and cloud connectivity features.
Provides contact details for STW offices in Germany, USA, and UK.
Details the process of installing a SIM card for mobile connectivity.
Explains methods for connecting the TC1 for operation or development.
Describes the procedure for powering up the TC1 and observing boot messages.
Outlines the different hardware variants of the TC1: WiFi, WiFi+, and Mobile.
Details the pin configuration of the TC1 connector for connectivity.
Provides instructions for securely mounting the TC1.
Explains how to retrieve version info for TC1's board support package.
Covers managing network interfaces (GSM, Ethernet, WLAN, IP, CAN, Bluetooth).
Discusses memory system (RAM, NOR, NAND, EEPROM).
Explains handling GPS data using the GPS daemon.
Explains reading and writing digital input/output PINs.
Introduces two ways for application development using TAF.
Provides an overview of TAF components and their communication.
Provides TAF library components and their functionality.
Explains function descriptions, types, and prefixes used in the manual.
Provides D-Bus utility functions for TAF applications.
Provides utility functions to handle the data pool daemon.
Provides utility functions to handle the logger daemon.
Provides GPS functionality using the ygps daemon.
Covers SMS functionality using the ysms daemon.
Manages internet connectivity automatically via ynetwork daemon.
Provides immediate NextJob.job file request functionality.
Signalizes the module's current state via LED.
Provides general utility functions for system operations.
Enables creating a custom root file system using Buildroot.
Guides on creating new applications using IDE or shell.
Details the toolchain installation and setup for development.
Provides steps for installing the toolchain on a Linux system.
Provides steps for installing the toolchain on a Windows system.
Lists components required for a bootable system found in BSPs.
Details the software for updating TC1 from a Windows OS.
Describes the software for updating TC1 from a Linux OS.
Covers serial interface setup and network protocols like TFTP, NFS, Telnet.
Guides on setting up the RS232 serial interface using terminal programs.
Details the installation and configuration of TFTP for host computer.
Explains NFS usage for root-file system and data transfer.
Describes using Telnet for communication and login to the TC1.
Details the TC1's digital output and digital input capabilities.
Covers GSM settings and manual control scripts.
Explains CAN bus termination and length limitations.
Describes creating Bluetooth connections between TC1 modules.
Details the TC1's e-mail client and account configuration.
A tool to display the content of the datapool.
A command line tool to fetch GPS data via dbus.
Reads acceleration values of the internal motion sensor.
Sends acceleration values from the internal sensor to the CAN bus.
Parses NMEA0183 strings from the device's GPS receiver.
Supports functionality of the STW Kefex Tool WinFlash.
Sends an SMS via TAF and the internal modem.
Reads the next SMS from the internal modem via dbus and ysmsd.
A command line tool to bridge CAN traffic between two interfaces/sockets.
Handles KEFEX project files and communicates with ECU via STW KEFEX protocol.
A lightweight HTTP server suitable for embedded systems.
Provides the GNU General Public License for the Linux kernel.
Details the GNU General Public License for BusyBox.
Specifies the license for uClibc as LGPL v2.1.
Lists compliance standards and certifications for the TC1.
Details electrical safety tests including voltage, current, and short circuit.
Covers radiated emissions and immunity tests for electromagnetic compatibility.
Specifies EMC standards for residential and industrial environments.
Defines EMC standards for radio equipment and telecom terminal equipment.
Details tests related to environmental influences like free fall, vibration, and temperature.
To Next Page