STW TC1 User Manual

6 Software
User Manual 84/374
Path
Input
information
Output
information
Description
 < start | restart > starts the internal GPS receiver
Low Level Hardware Access
Path
Input
information
Output
information
Description
/dev/ttyPSC2
-
NMEA string
from GPS
module
This user space interface reads out the NMEA string from
the GPS module.
/proc/stw_gps/port
-
NMEA string
from GPS
module
Symbolic link for the tty-device (/dev/ttyPSC2) the GPS
module is connected to.
6.9 Serial
Low Level Hardware Access
Path
Input information
Output information
Description
/dev/ttyPSC6
Transmit characters
one by one.
Receives characters
one by one.
This device created by the linux
kernel provides the serial interface
(RS232) of the system. The serial
interface is already started by the
boot up sequence.
NOTE:
The serial interface is already started during the boot up sequence. It is not necessary to start it
manually.

STW TC1 Specifications

General

Brand	STW
Model	TC1
Category	Controller
Language	English