07
Follower system tracks the position of the LED beacon using stationary witness cameras. Follower witness
cameras must be mounted on fixed construction to ensure that they stay in the same position after the
calibration. Even the smallest movement of witness cameras can disrupt calibration.
Below is a hypothetical example of an Follower system witness cameras studio setup consisting of 7
Follower witness cameras.
In this example only object tracking is planned.
© 2022 STYPE; ALL RIGHTS RESERVED.
18
7.3 Object tracking
Figure 7.3 Follower witness cameras setup
(object tracking) - TOP VIEW
Figure 7.4 Follower witness cameras setup
(object tracking) - SIDE VIEW
When mounted, witness cameras should be directed to the middle of the tracked area.
To Next Page
Loading...