Subaru impreza 2017 - Page 653

Name Values (Range) Unit Step Default Description
PTPGMPriority1 0 - 16 - 1 - PTP Grand Master Prio 1
PTPGMPriority2 0 - 16 - 1 - PTP Grand Master Prio 2
PTPGMAccuracy 0 - 16 - 1 - PTP Grand Master Accuracy
PTPParentId 0 - 16 - 1 - PTP Id of closest parent
PTPSteps 0 - 16 - 1 - PTP number of stepsto Grand master
SNTPSource 0 - 16 - 1 - The source of the SNTP time
SNTPMaster 0 - 16 - 1 - The IP-adress of the SNTP master
GPSNumberOfSats -1 - 12 - 1 0 GPS satellites used in calculation of time
PTPOwnId 0 - 16 - 1 - PTP own clock identity
GUID-CD154442-0F80-4B69-8C43-22445FD7F865 v1
GPS settings are not supported by 650 due to hardware restrictions.
PID-6188-SETTINGS v6
Table 504: BININPUT Non group settings (basic)
Name
Values (Range) Unit Step Default Description
ModulePosition 3 - 16 - 1 3 Hardware position of IO module for time
synchronization
BinaryInput 1 - 16 - 1 1 Binary input number for time
synchronization
BinDetection PositiveEdge
NegativeEdge
- - PositiveEdge Positive or negative edge detection
PID-6608-SETTINGS v4
Table 505: SNTP Non group settings (basic)
Name
Values (Range) Unit Step Default Description
ServerIP-Add 0 - 18 IP
Address
1 0.0.0.0 Server IP-address
RedServIP-Add 0 - 18 IP
Address
1 0.0.0.0 Redundant server IP-address
LocalPort 0 - 65535 - 1 49152 Port number in the IED to communicate
with the SNTP server
PID-6212-SETTINGS v5
Table 506: DSTENABLE Non group settings (basic)
Name
Values (Range) Unit Step Default Description
DST Enable Off
On
- - On Enables or disables the use of Daylight
Saving Time
1MRK 505 384-UEN A Section 16
Basic IED functions
Breaker protection REQ650 2.2 IEC 647
Technical manual