Black plate (32,1)
北米Model "A3170BE-A" EDITED: 2011/ 7/ 12
1-4 Seat, seatbelt and SRS airbags
To adjust the seat cushion angle, pull up
or push down the front end of the control
switch.
! Seat height adjustment (driver’s
seat)
To adjust the seat height, pull up or push
down the rear end of the control switch.
& Memory function (driver’s
seat – if equipped)
Two of your favorite seat positions can be
registered. Register the seat position with
button “1” or “2” and retrieve the seat
position by pressing either button.
The following seat positions ca n be
registered.
. Forward/backward position of the seat
. Angle of seatback
. Angle of seat cushion
. Height of seat
! Registration of seat position
WARNING
. Never adjust the seat while driv-
ing to avoid loss of vehicle con-
trol and personal injury.
. Before adjusting the seat, make
sure luggage and the hands and
feet of second-row seat passen-
gers are clear of the adjusting
mechanism.
1. With the select lever in the “P” posi-
tion, adjust the seat position.
2. While pressing the “SET” button, press
the desired button “1” or “2”.
3. The chime sounds once, and the seat
position is registered.
! Retrieval of seat position
WARNING
. Never retrieve the seat position
while driving to avoid loss of
vehicle control and personal in-
jury.
. Perform the seat position retrie-
val before driving. Be sure to
confirm that the select lever
position is in the “P” position.
Do not drive until the retrieval of
the seat position is complete.
To Next Page
Loading...
