Subaru Tribeca 2012 - Playing Video Cds; Starting Playback; Stopping Playback; Pausing

36
Playing Video CDs
 Starting playback
With the ignition switch in the “ACC” or “ON” position, insert the CD into the disc slot of the DVD player, with the label side facing up.
The player automatically starts playing the disc.
If a disc is already in the player, press the remote control “DVD • CD” button on your remote control to start playback.
 Stopping playback
Method using screen and remote control:
Highlight the “ ” switch on the screen with the remote control joystick, then press
the “ENTER” button.
Method using remote control alone:
Press the remote control “STOP ( )” button.
 Pausing
Method using screen and remote control:
Highlight the “ ” switch on the screen with the remote control joystick, then press
the “ENTER” button.
Method using remote control alone:
Press the remote control “PAUSE •
PLAY ( )” button.
To restart playback, perform either of the above operations again.
Playing Discs
Information Provided by: