34
Image angle selection on multi-angle recorded scenes
If you play back a DVD video disc containing scenes recorded using the multi-angle technology, you can enjoy viewing them from dif-
ferent angles. For example, you can view the image of the same mountain from both the right and left sides.
Some discs may not be compatible with this function.
Method using screen and remote control:
Highlight the “ANGLE” switch on the screen with the remote control joystick, then
press the “ENTER” button. The display will switch to the angle selection screen.
Click the “ ” end of the remote control joystick to highlight the desired angle on the
screen, then press the “ENTER” button. To revert to the original video screen, high-
light the “ ” switch with the joystick, and then press the “ENTER” button.
Method using remote control alone:
Press the “ANGLE” button on the remote control. Refer to the above for the subse-
quent operation.
NOTE
y The default setting is “01” for all multi-angle recorded scenes.
y You may have to wait a short while for the change in angle to take place.
y You can make multi-angle scenes identifiable with the angle mark shown on
the display screen. For details of the method, refer to Page 47.
Playing Discs
To Next Page
Loading...
Need help?
General
