EasyManua.ls Logo

Subaru Tribeca 2012 - Rear Gate

Subaru Tribeca 2012
578 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (126,1)
Model "A3170BE-A" EDITED: 2011/ 7/ 12
2-24 Keys and doors
Rear gate
The rear gate can be locked and unlocked
using any of the following systems.
. Power door locking switch: Refer to
Power door locking switches F2-7.
. Remote keyless entry system (if
equipped): Refer to Remote keyless entry
system F2-8.
To open:
First unlock the rear gate lock then push
the button.
To close:
Lower the rear gate slowly and push down
firmly until the latch engages.
The rear gate can be lowered easily if you
pull it down holding the recessed grip.
WARNING
. To p revent dangerous exhaust
gas from entering the vehicl e,
always keep the rear gate closed
while driving.
. Do not attempt to shut the rear
gate while holding the recessed
grip. Also avoid closing the rear
gate by pulling on the recessed
grip from inside the cargo space.
There is a danger of your hand
being caught and injured.
CAUTION
. Do not jam a plastic bag in or
place cellophane tape on the rear
gate stays or scratch the stays
while loading or unloading cargo.
That could cause leakage of gas
from the stays, which may result
in their inability to hold the rear
gate open.
. Be careful not to hit your head or
face on the rear gate when open-
ing or closing the rear gate and
when loading or unloading car-
go.
Information Provided by:

Table of Contents

Related product manuals